Transformers and Inductors, 50 VA to over 1 MW
Our experience in transformer design and manufacturing encompasses wide ranges of
power levels and applications. We have built transformers from 50 VA to over 1 MW and
for just about every use you can imagine. Our goal is to work with our customers to
arrive at a specification that will exactly meet the need at hand and to build a product that
is of high quality and reliability, providing worry-free operation for years to come.

Below are samples of some of our transformers and inductors.
Click on the images below for product details.
 
Power Transformers

Transformers that are designed to
provide system power. Either step-
up or step-down. Multiple primary
and secondary voltages can be
accommodated.
2.3 kVA Main AC Power
150 kVA
Step-Down
40 kVA
Step-Down
1,000 kVA Step-UP
 
Isolation Transformers

Transformers with electrical separa-
tion between primary and secondary
windings to provide isolation
between either high voltage and
electrical circuits or to ground. Also
provides isolation between load
and source.
68.6 VA
10 kVDC Isolation

600 VA
50 kVDC Test Isolation
4 kVA
4 kV Isolation
7.2 kVA
2.5 kV Isolation
 
Noise Cut Transformers

Transformers that provide
exceptional noise attenuation over a
broad spectrum of frequencies
including common and transverse
modes. Units are typically built in
an enclosure.
Most Noise Cut Transformers are
purchased as assemblies in
enclosures with circuit protection
and other components. Please see
the "Electronic Assemblies" area of
our site for examples of these products
14.4 kVA
Noise Cut Transformer
 
Pulse Transformers

Transformers used to supply high
power for pulsed klystron and
magnetron applications.
2 uS Pulse Width
3.5 A Operating Current
10 kV Peak
Pulse Voltage
7.2 MW
8.5 kV Peak Volts
 
Control Transformers

Often used to power low voltage
electronics in a circuit, such as
EMO switches, contactors, etc.
575 VA
Step-Down Transformer
1,150 VA
Step-Down Transformer
150 VA
Step-Down Transformer
 

Autoformers

Transformers with no isolation
between input and output windings.
Tend to be smaller for the same
power level. A good choice when
isolation is not required.
18.2 kVA
NEMA 4 Enclosure
160 kVA
K Factor 21
15 kVA
 
Inductors/Reactors/Chokes

Resist changes in current. DC
chokes, air core reactors,
saturable inductors, line reactors.
2.0 mHY
100 ADC
35 mHY
1400 VDC Peak
0.5 HY
18 ADC
1

963 Ames Avenue Milpitas, CA 95035

tel(408)263-8444

fax(408)263-8448
© 2004-2005