IMPORTANT: THESE TERMS LIMIT QTE’S WARRANTIES AND LIABILITY, MAKE ALL PRODUCTS NON-CANCELABLE AND NON-RETURNABLE, AND EXCLUDE ANY TERMS PROPOSED BY BUYER. PLEASE READ CAREFULLY.
1. General. (a) These Terms and Conditions of Sale (“Terms”), together with QTE’s written quotation (“Quotation”) and order acknowledgment (“Order Acknowledgment”), form the entire agreement (the “Contract”) between Quality Transformer & Electronics, a California corporation (“QTE”), and the purchaser (“Buyer”). The Contract covers the sale of transformers, inductors, magnetic components, power supplies, assemblies, other goods and related services (“Products”). It supersedes all prior proposals, negotiations and representations. If the Quotation conflicts with these Terms, the Quotation controls. (b) Each Quotation is an offer to sell on these Terms. Buyer accepts it by issuing an order that references the Quotation within its validity period. ACCEPTANCE IS EXPRESSLY LIMITED TO THE QUOTATION AND THESE TERMS. If an order is not an acceptance of a Quotation, QTE’s acceptance of the order is expressly conditioned on Buyer’s assent to these Terms. Buyer assents by issuing an order, accepting delivery or paying. In either case, QTE rejects all additional or different terms in any Buyer purchase order, portal, supplier manual, code of conduct, flow-down clause or other Buyer document. No acknowledgment, shipment, payment or course of dealing makes those terms part of the Contract. (c) QTE may update these Terms from time to time by posting the updated version at https://www.qte.com/legal/terms-of-sale or otherwise providing it to Buyer. Each Contract is governed by the version of these Terms in effect on the Quotation date or, if Buyer’s order does not accept a Quotation, on the date QTE acknowledges the order. Buyer’s acceptance or assent under Section 1(b) constitutes acceptance of that version. No update applies to a Contract formed before the date of the update. Except as stated in this Section 1(c), these Terms may be amended or modified only by a writing that states specifically that it amends these Terms and is signed by an authorized QTE officer. (d) All Products are made to order for Buyer.
2. Quotations, Prices and Taxes. (a) A Quotation is valid for fifteen (15) days unless it states otherwise. QTE may withdraw or revise a Quotation before Buyer accepts it. QTE may correct clerical errors in any Quotation, Order Acknowledgment or invoice. (b) Prices are in U.S. dollars. Prices exclude freight, insurance, special packaging, special testing, certifications and documentation unless the Quotation includes them. (c) QTE may raise the price by the amount of the increase, on written notice, if either of the following occurs before shipment: QTE’s cost of copper, aluminum, electrical steel, core materials, insulation or other materials or components rises more than 5% above its cost on the Quotation date, or a new or increased tariff, duty or government charge applies to the Products or their materials. (d) Prices exclude sales, use, excise, value-added and similar taxes and Buyer shall pay those taxes. A Buyer claiming an exemption must provide a valid certificate with its order. Buyer shall indemnify QTE for any tax, interest and penalties that result from QTE’s reliance on the certificate.
3. Payment. (a) Subject to QTE’s credit approval and unless the Quotation states otherwise,, payment is due thirty (30) days from the invoice date, in U.S. dollars, by ACH, wire or check. Buyer shall pay without setoff, deduction or withholding, including against amounts owed under other orders. QTE invoices each shipment, including partial shipments, on shipment. If Buyer delays shipment, QTE invoices on notice that the Products are ready to ship. A delay or nonconformity in one shipment does not excuse payment for the others. (b) Buyer must dispute an invoice in writing, with reasonable detail, within ten (10) days of the invoice date and pay the undisputed portion when due. An invoice not disputed within that period is deemed accepted. (c) Overdue amounts accrue a late charge of the lesser of 1.5% per month or the maximum lawful rate. Buyer shall reimburse QTE’s reasonable pre-suit collection costs, including collection agency fees. Section 16(c) governs attorneys’ fees in any action. (d) QTE may take any of the following steps if Buyer fails to pay when due, or if in QTE’s judgment Buyer’s financial condition does not justify the payment terms: require advance payment or other security, suspend work and shipments, declare all amounts immediately due, or cancel unshipped orders and recover the charges in Section 5. Orders may require a deposit as stated in the Quotation.
4. Delivery, Title and Risk of Loss. (a) Unless the Quotation states otherwise, Products are delivered EXW QTE’s Milpitas, California facility (Incoterms® 2020), and title and risk of loss pass to Buyer on delivery. QTE may load Products onto Buyer’s carrier, or arrange freight, insurance or export clearance at Buyer’s request. When it does, QTE acts as Buyer’s agent at Buyer’s risk and expense, and the delivery terms do not change. Buyer files all transit claims with the carrier. QTE uses standard commercial packaging. Special packaging or labeling is provided at Buyer’s expense if specified in the Quotation. QTE may make partial and early shipments. (b) LEAD TIMES AND DELIVERY DATES ARE ESTIMATES. TIME IS NOT OF THE ESSENCE. Lead times run from the later of the Order Acknowledgment date and QTE’s receipt of all required approvals, information and deposits. QTE will use commercially reasonable efforts to meet estimated dates but is not liable for delay. Buyer may not cancel, reject Products or assess penalties or charges because of delay. Expedites are subject to QTE’s acceptance and expediting charges. (c) QTE may store the Products at Buyer’s risk and expense if Buyer delays approvals, information or payment, or fails to take delivery within fifteen (15) days after notice that the Products are ready. Delivery is then complete and payment is due. Buyer shall pay storage at the greater of 1.5% of the stored Products’ price per month or QTE’s actual cost. If Buyer’s delay exceeds ninety (90) days, QTE may treat the order as cancelled by Buyer under Section 5.
5. Cancellation, Rescheduling and Returns. ALL PRODUCTS ARE NON-CANCELABLE, NON-RETURNABLE AND NON-RESCHEDULABLE. This Section 5 applies if Buyer cancels, repudiates or refuses delivery of Products after the Contract is formed, or if an order is treated as cancelled under Section 3(d), 4(c) or 14(b). Buyer shall then pay: (i) the full Contract price of completed Products, which QTE will hold or store under Section 4(c); and (ii) for uncompleted Products, QTE’s costs incurred or committed (including without limitation, materials, labor, overhead, and non-cancellable supplier commitments) and cancellation expenses, plus 10% of their Contract price, less net resale or salvage proceeds. The amount under clause (ii) will not exceed the Contract price of the uncompleted Products. Buyer agrees these amounts are a reasonable estimate of QTE’s damages, which would otherwise be difficult to determine. Products may be returned only under Section 8.
6. Changes. Buyer changes to specifications, drawings, quantities, schedule or scope require QTE’s written acceptance and a written adjustment to price, schedule and other affected terms, agreed before implementation. Buyer shall pay for work and materials made obsolete by a change. Changes required by a change in law after the Quotation date are treated as Buyer changes. QTE may change designs, materials or processes without notice if the change does not adversely affect form, fit or function under QTE’s specifications, unless the Quotation requires change notification.
7. Inspection and Acceptance. (a) QTE tests Products to its standard procedures. Additional testing, source inspection, first article inspection and certifications are provided only if specified and priced in the Quotation. Buyer inspections at QTE’s facility must be scheduled at least five (5) business days in advance and held during business hours. They must follow QTE’s safety and confidentiality rules. (b) If the Quotation includes factory acceptance testing, the Products are accepted and shipment is authorized unless Buyer delivers specific written objections within ten (10) days after the test. This applies whether or not Buyer attended. (c) BUYER SHALL INSPECT PRODUCTS WITHIN TEN (10) DAYS AFTER RECEIPT, AND IN ANY EVENT WITHIN TWENTY (20) DAYS AFTER DELIVERY. BUYER SHALL NOTIFY QTE IN WRITING OF ANY SHORTAGE, DAMAGE OR OTHER NONCONFORMITY DISCOVERABLE BY REASONABLE INSPECTION WITHIN THAT PERIOD. Products not rejected within that period are irrevocably accepted, as are Products that Buyer uses, resells or incorporates into other goods. Buyer may not reject Products for an insubstantial nonconformity, and QTE may cure any nonconformity. Section 8 alone covers latent defects.
8. Limited Warranty. (a) QTE warrants to the original Buyer that, for twelve (12) months from shipment (the “Warranty Period”), Products will be free from defects in material and workmanship. QTE does not warrant that Buyer’s specifications are adequate or suitable. Prototypes and samples are provided “AS IS.” (b) QTE must receive written notice of the failure, or the defective Product itself, within the Warranty Period. If QTE’s examination confirms the defect, QTE will, at its option, repair, replace or adjust the Product. QTE’s determination of whether a Product failed in normal operation is final. Repaired or replaced Products are warranted for the rest of the original Warranty Period. Before requesting a return, Buyer shall confirm that the Product itself is at fault. Warranty returns require a Return Material Authorization (“RMA”) number and are shipped freight prepaid, on a memo basis, at Buyer’s risk. Buyer shall not issue debit memos until QTE advises Buyer of the final disposition. QTE pays standard ground return freight for valid claims. If QTE finds no defect or an exclusion applies, Buyer pays evaluation, repair and freight charges, subject to a minimum charge of $300. QTE is not responsible for removal, reinstallation, access, de-energizing, field labor or travel. (c) This warranty does not cover defects resulting from: (i) misuse, neglect, accident, use contrary to QTE’s instructions, or improper storage, handling or installation by anyone other than QTE; (ii) operation outside QTE’s specified ratings; (iii) power-system surges, lightning or faults; (iv) repair or modification by anyone other than QTE; (v) designs, materials or components furnished or specified by Buyer; (vi) normal wear and tear; or (vii) Products not paid for in full. (d) THESE WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. THE REMEDIES IN SECTION 8(b) ARE BUYER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY WARRANTY BREACH, DEFECT OR NONCONFORMITY. IF THOSE REMEDIES FAIL OF THEIR ESSENTIAL PURPOSE, QTE’S SOLE LIABILITY IS TO REFUND THE PRICE PAID. This warranty is not transferable.
9. Buyer’s Specifications; Technical Assistance. Buyer is solely responsible for the accuracy and suitability of its specifications. Buyer is also solely responsible for determining whether the Products suit its application and for complying with the codes and regulations that apply to its use. QTE’s review or approval of Buyer’s specifications does not make QTE responsible for them. Any application or design advice QTE provides is without warranty and at Buyer’s risk. Buyer has not relied on any statement not set out in the Contract. Buyer shall pass QTE’s ratings, warnings and instructions to its personnel and customers. Buyer shall ensure that Products, including high-voltage Products, are installed, operated and maintained only by qualified persons.
10. Limitation of Liability. (a) QTE AND ITS SUPPLIERS AND SUBCONTRACTORS SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES. NOR SHALL THEY BE LIABLE FOR LOSS OF PROFITS, REVENUE, PRODUCTION OR USE; DOWNTIME; COST OF CAPITAL OR SUBSTITUTE PRODUCTS; REWORK, REMOVAL, REINSTALLATION OR RECALL COSTS; DELAY; OR THIRD-PARTY CLAIMS. THIS SECTION 10(a) APPLIES UNDER ANY THEORY, EVEN IF QTE WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. (b) QTE’S TOTAL LIABILITY ARISING OUT OF OR RELATING TO THE CONTRACT OR THE PRODUCTS, UNDER ANY THEORY, SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCTS GIVING RISE TO THE CLAIM. (c) QTE has no liability for penalties, liquidated damages or chargebacks. QTE has no indemnification obligation. (d) Buyer must give notice of any warranty claim within the Warranty Period, and must bring any action within one (1) year after it accrues. Subject to Section 10(e), Buyer’s remedies are limited to those in the Contract, and Buyer waives non-contractual claims to the maximum extent permitted by law. (e) These limitations reflect the risk allocation on which QTE’s prices are based. They apply even if a limited remedy fails of its essential purpose. Nothing in the Contract limits or excludes QTE’s liability for: (i) fraud; (ii) willful injury to the person or property of another, or other intentional misconduct; (iii) gross negligence; (iv) violation of law, whether willful or negligent, to the extent such liability cannot be limited under California Civil Code Section 1668; or (v) any other liability that cannot be limited under applicable law. If a limitation is held unenforceable as to a claim, it applies to the maximum extent permitted and continues to apply to all other claims.
11. Intellectual Property; Confidentiality. (a) QTE retains all rights, including intellectual property rights, in the Products and in its designs, drawings, specifications, processes, tooling, software and know-how. QTE also retains all rights in inventions and improvements it makes in performing any order, including those developed to Buyer’s specifications. Tooling remains QTE’s property unless the Quotation states otherwise. No deliverable is a “work made for hire.” Buyer receives only a non-exclusive right to use and resell the Products as delivered. (b) Buyer retains its pre-existing intellectual property in the specifications and materials it furnishes (“Buyer Materials”). Buyer grants QTE a non-exclusive, royalty-free license to use Buyer Materials to perform orders. QTE may make similar products for others, provided it does not use Buyer’s Confidential Information. (c) Each party shall keep confidential the other’s non-public information that is marked confidential or reasonably understood to be confidential (“Confidential Information”) and use it only to perform the Contract. QTE’s drawings, designs, test data and pricing are QTE’s Confidential Information. These obligations do not cover information that is public through no fault of the recipient, previously known to the recipient, lawfully received from a third party without restriction, or independently developed. A recipient may disclose Confidential Information when required by law, after giving prompt notice where lawful. These obligations last three (3) years after the last delivery, and for trade secrets, as long as they remain trade secrets. (d) Buyer shall not reverse engineer the Products. Buyer shall not use QTE’s Confidential Information to make or source products elsewhere or to seek intellectual property protection. Neither party will use the other’s name or marks in publicity without consent.
12. Indemnification. Buyer shall defend, indemnify and hold harmless QTE and its affiliates, officers, directors, employees and agents from all claims, losses, damages, costs and expenses, including reasonable attorneys’ fees, arising out of: (i) Buyer Materials or Buyer’s specifications or instructions, including infringement claims; (ii) modification, combination, installation or use of Products by Buyer or its customers; (iii) Buyer’s breach of Section 9 or 15; (iv) warranties Buyer makes beyond Section 8; or (v) negligence or willful misconduct of Buyer or its personnel or customers.
13. Force Majeure; Allocation. (a) QTE is not liable for, or in default because of, delay or failure caused by circumstances beyond its reasonable control. These include natural disasters, epidemics, war, terrorism, civil unrest, government action, tariffs, sanctions, embargoes, labor disputes, utility outages, cyberattacks and transportation delays. They also include inability to obtain materials, components or energy at reasonable prices from usual sources, supplier delays, and acts or omissions of Buyer. Delivery dates extend by the period of delay plus a reasonable restart period. If performance is prevented for more than ninety (90) days, QTE may cancel the affected unshipped portion without liability. Buyer shall then pay for Products delivered and QTE’s costs incurred for the cancelled portion. (b) If supply is insufficient, QTE may allocate available supply in any fair and reasonable manner and need not buy from other sources. (c) No force majeure event excuses Buyer’s payment obligations.
14. Suspension and Termination. (a) Buyer may terminate an order for QTE’s material breach only after written notice describing the breach, and only if QTE fails to begin and diligently pursue a cure within fifteen (15) days. Buyer shall then pay for Products delivered, and its remedies remain limited by Sections 8 and 10. Buyer has no right to terminate for convenience except under Section 5. (b) QTE may suspend or terminate any or all orders on written notice if Buyer fails to pay when due, fails to cure any other breach within ten (10) days after notice, or becomes insolvent or subject to bankruptcy proceedings. QTE may do the same if it reasonably believes performance would violate applicable law, including export controls. On termination by QTE, Buyer shall pay the amounts in Section 5 as if Buyer had cancelled. Rights accrued before termination survive.
15. Compliance; Export Controls. Buyer is solely responsible for complying with the laws, codes, standards and permits that apply to installation, use, resale and disposal of the Products, and for import clearance and duties. Products, technical data and software may be subject to U.S. export control and sanctions laws, including the Export Administration Regulations, the International Traffic in Arms Regulations and regulations of the Office of Foreign Assets Control. Buyer shall comply with those laws. Buyer shall not export, re-export or transfer Products, technical data or software to any prohibited country, end user or end use without authorization. Buyer represents that it is not a restricted or sanctioned party and shall provide end-use and end-user information on request. For Products delivered for export, the following applies: “These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.”
16. Governing Law; Disputes. (a) California law, including the California Commercial Code, governs the Contract, without regard to conflict-of-laws principles. The United Nations Convention on Contracts for the International Sale of Goods does not apply. (b) The state courts in Santa Clara County, California and the U.S. District Court for the Northern District of California have exclusive jurisdiction. Buyer consents to personal jurisdiction in those courts and waives inconvenient-forum objections. Before starting any other litigation, the parties’ senior managers shall try to resolve the dispute for thirty (30) days after a written request. (c) In any action or proceeding arising out of or relating to the Contract or the Products, whether in contract, tort or otherwise, the prevailing party may recover its reasonable attorneys’ fees and costs.
17. Miscellaneous. Buyer may not assign the Contract without QTE’s prior written consent. QTE may assign the Contract to an affiliate or successor, or assign its right to payment. Notices must be in writing and delivered by courier, certified mail or email with confirmation of receipt, to the addresses in the Quotation or order. Notices are effective on receipt. No waiver is effective unless in writing, and no course of dealing or usage of trade modifies these Terms. An invalid provision is enforced to the maximum extent permitted, and the rest of the Contract remains in force. The parties are independent contractors, and there are no third-party beneficiaries. Provisions that by their nature should survive completion, cancellation or termination will survive. QTE’s remedies are cumulative. “Including” means “including without limitation.” Electronic records and signatures have the same effect as originals. QTE may update these Terms, and the version in effect on the Quotation date governs.